(DEBUG)
(ISOLATE) 
(IDENTIFY *)
# (CONFIGURE ESS1868/-1 (LD 0 
# (IO 



#
# Trying port address 0203
# Board 1 has serial identifier 27 ff ff ff ff 68 18 73 16

# (DEBUG)
# (READPORT 0x0203)
# (ISOLATE PRESERVE)
# (IDENTIFY *)
(VERBOSITY 2)
(CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) # or WARNING

# Card 1: (serial identifier 27 ff ff ff ff 68 18 73 16)
# Vendor Id ESS1868, No Serial Number (-1), checksum 0x27.
# Version 1.0, Vendor version 1.0
# ANSI string -->Maxi Sound 64 Series<--
#
# Logical device id ESS8600
#     Device supports vendor reserved register @ 0x38
#     Device supports vendor reserved register @ 0x3a
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy

(CONFIGURE ESS1868/-1 (LD 0
#     Logical device decodes 16 bit IO address lines
#         Minimum IO base address 0x0800
#         Maximum IO base address 0x0ff8
#         IO base alignment 8 bytes
#         Number of IO addresses required: 8
(IO 0 (SIZE 8) (BASE 0x0800))
 (NAME "ESS1868/-1[0]{Maxi Sound 64 Series}")
(ACT Y)
))
#
# Logical device id ESS8601
#     Device supports vendor reserved register @ 0x38
#     Device supports vendor reserved register @ 0x3a
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy

(CONFIGURE ESS1868/-1 (LD 1

# Multiple choice time, choose one only !

#     Start dependent functions: priority preferred
#       First DMA channel 1.
#             8 bit DMA only
#             Logical device is not a bus master
#             DMA may execute in count by byte mode
#             DMA may not execute in count by word mode
#             DMA channel speed in compatible mode
(DMA 0 (CHANNEL 1))
#       Next DMA channel 0 or 3.
#             8 bit DMA only
#             Logical device is not a bus master
#             DMA may execute in count by byte mode
#             DMA may not execute in count by word mode
#             DMA channel speed in compatible mode
(DMA 1 (CHANNEL 3))
#       IRQ 5.
#             High true, edge sensitive interrupt (by default)
(INT 0 (IRQ 5 (MODE +E)))
#       Fixed IO base address 0x0220
#             Number of IO addresses required: 16
(IO 0 (SIZE 16) (BASE 0x0220))
#       Fixed IO base address 0x0388
#             Number of IO addresses required: 4
(IO 1 (SIZE 4) (BASE 0x0388))
#       Fixed IO base address 0x0300
#             Number of IO addresses required: 2
(IO 2 (SIZE 2) (BASE 0x0300))

#       Start dependent functions: priority acceptable
#       First DMA channel 1.
#             8 bit DMA only
#             Logical device is not a bus master
#             DMA may execute in count by byte mode
#             DMA may not execute in count by word mode
#             DMA channel speed in compatible mode
# (DMA 0 (CHANNEL 1))
#       Next DMA channel 0 or 3.
#             8 bit DMA only
#             Logical device is not a bus master
#             DMA may execute in count by byte mode
#             DMA may not execute in count by word mode
#             DMA channel speed in compatible mode
# (DMA 1 (CHANNEL 0))
#       IRQ 5, 7, 10 or 11.
#             High true, edge sensitive interrupt (by default)
# (INT 0 (IRQ 5 (MODE +E)))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0220
#             Maximum IO base address 0x0240
#             IO base alignment 32 bytes
#             Number of IO addresses required: 16
# (IO 0 (SIZE 16) (BASE 0x0220))
#       Fixed IO base address 0x0388
#             Number of IO addresses required: 4
# (IO 1 (SIZE 4) (BASE 0x0388))
#       Fixed IO base address 0x0300
#             Number of IO addresses required: 2
# (IO 2 (SIZE 2) (BASE 0x0300))

#       Start dependent functions: priority acceptable
#       First DMA channel 0, 1 or 3.
#             8 bit DMA only
#             Logical device is not a bus master
#             DMA may execute in count by byte mode
#             DMA may not execute in count by word mode
#             DMA channel speed in compatible mode
# (DMA 0 (CHANNEL 0))
#       Next DMA channel 0, 1 or 3.
#             8 bit DMA only
#             Logical device is not a bus master
#             DMA may execute in count by byte mode
#             DMA may not execute in count by word mode
#             DMA channel speed in compatible mode
# (DMA 1 (CHANNEL 0))
#       IRQ 5, 7, 9, 10, 11 or 12.
#             High true, edge sensitive interrupt (by default)
# (INT 0 (IRQ 5 (MODE +E)))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0220
#             Maximum IO base address 0x0280
#             IO base alignment 32 bytes
#             Number of IO addresses required: 16
# (IO 0 (SIZE 16) (BASE 0x0220))
#       Fixed IO base address 0x0388
#             Number of IO addresses required: 4
# (IO 1 (SIZE 4) (BASE 0x0388))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0300
#             Maximum IO base address 0x0330
#             IO base alignment 16 bytes
#             Number of IO addresses required: 2
# (IO 2 (SIZE 2) (BASE 0x0300))

#       Start dependent functions: priority acceptable
#       First DMA channel 0, 1 or 3.
#             8 bit DMA only
#             Logical device is not a bus master
#             DMA may execute in count by byte mode
#             DMA may not execute in count by word mode
#             DMA channel speed in compatible mode
# (DMA 0 (CHANNEL 0))
#       Next DMA channel 0, 1 or 3.
#             8 bit DMA only
#             Logical device is not a bus master
#             DMA may execute in count by byte mode
#             DMA may not execute in count by word mode
#             DMA channel speed in compatible mode
# (DMA 1 (CHANNEL 0))
#       IRQ 5, 7, 9, 10, 11 or 12.
#             High true, edge sensitive interrupt (by default)
# (INT 0 (IRQ 5 (MODE +E)))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0220
#             Maximum IO base address 0x0280
#             IO base alignment 32 bytes
#             Number of IO addresses required: 16
# (IO 0 (SIZE 16) (BASE 0x0220))
#       Fixed IO base address 0x0388
#             Number of IO addresses required: 4
# (IO 1 (SIZE 4) (BASE 0x0388))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0800
#             Maximum IO base address 0x0ffe
#             IO base alignment 2 bytes
#             Number of IO addresses required: 2
# (IO 2 (SIZE 2) (BASE 0x0800))

#       Start dependent functions: priority functional
#       First DMA channel 0, 1 or 3.
#             8 bit DMA only
#             Logical device is not a bus master
#             DMA may execute in count by byte mode
#             DMA may not execute in count by word mode
#             DMA channel speed in compatible mode
# (DMA 0 (CHANNEL 0))
#       Next DMA channel 0, 1 or 3.
#             8 bit DMA only
#             Logical device is not a bus master
#             DMA may execute in count by byte mode
#             DMA may not execute in count by word mode
#             DMA channel speed in compatible mode
# (DMA 1 (CHANNEL 0))
#       IRQ 5, 7, 9, 10, 11 or 12.
#             High true, edge sensitive interrupt (by default)
# (INT 0 (IRQ 5 (MODE +E)))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0220
#             Maximum IO base address 0x0280
#             IO base alignment 32 bytes
#             Number of IO addresses required: 16
# (IO 0 (SIZE 16) (BASE 0x0220))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0800
#             Maximum IO base address 0x0ffc
#             IO base alignment 4 bytes
#             Number of IO addresses required: 4
# (IO 1 (SIZE 4) (BASE 0x0800))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0800
#             Maximum IO base address 0x0ffe
#             IO base alignment 2 bytes
#             Number of IO addresses required: 2
# (IO 2 (SIZE 2) (BASE 0x0800))

#     End dependent functions
 (NAME "ESS1868/-1[1]{Maxi Sound 64 Series}")
(ACT Y)
))
#
# Logical device id ESS8602
#     Device supports vendor reserved register @ 0x39
#     Device supports vendor reserved register @ 0x3a
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy

(CONFIGURE ESS1868/-1 (LD 2

# Multiple choice time, choose one only !

#     Start dependent functions: priority preferred
#       Fixed IO base address 0x0201
#             Number of IO addresses required: 1
# (IO 0 (SIZE 1) (BASE 0x0201))

#       Start dependent functions: priority acceptable
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0200
#             Maximum IO base address 0x020f
#             IO base alignment 1 bytes
#             Number of IO addresses required: 1
(IO 0 (SIZE 1) (BASE 0x0200))

#     End dependent functions

#     Compatible device id PNPb02f
 (NAME "ESS1868/-1[2]{Maxi Sound 64 Series}")
(ACT Y)
))
#
# Logical device id ESS8603
#     Device supports vendor reserved register @ 0x38
#     Device supports vendor reserved register @ 0x3a
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy

(CONFIGURE ESS1868/-1 (LD 3

# Multiple choice time, choose one only !

#     Start dependent functions: priority preferred
#       IRQ 9.
#             High true, edge sensitive interrupt (by default)
(INT 0 (IRQ 9 (MODE +E)))
#       Fixed IO base address 0x0330
#             Number of IO addresses required: 6
(IO 0 (SIZE 6) (BASE 0x0330))

#       Start dependent functions: priority acceptable
#       IRQ 5, 7, 9, 10, 11 or 12.
#             High true, edge sensitive interrupt (by default)
# (INT 0 (IRQ 5 (MODE +E)))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0330
#             Maximum IO base address 0x0ff0
#             IO base alignment 16 bytes
#             Number of IO addresses required: 6
# (IO 0 (SIZE 6) (BASE 0x0330))

#     End dependent functions
 (NAME "ESS1868/-1[3]{Maxi Sound 64 Series}")
(ACT Y)
))
# End tag... Checksum 0x00 (OK)

# Returns all cards to the "Wait for Key" state
(WAITFORKEY)
